| Submitted By |
Product(s) Reviewed |
Submission Date |
 |
 |
Jim in Brentwood, NH Guys - A big thanks to you for m... |
 |
PSC1502 PSC Series 150W (2x75) Amplifier |
04/26/2007 |
Guys - A big thanks to you for making such great products! I recently installed your PSC1502 amp and a pair of CX504-70 speakers as you suggested, in my '07 Street Glide. Man! What a freakin difference! This system is definitely the way to go! Easy install and well worth the money! The clarity is super, and I can't believe the bass now! I can cruise down the highway at 80+ and still hear my tunes like I was standing still! Thanks again guys!
Jim
|
 |
 |
Viktor in Hesperia, CA Hey Mike, thanks for the pro adv... |
 |
CX504-70 CX Series 4 Ohm Component Speakers |
04/24/2007 |
Hey Mike, thanks for the pro advice, and I have to say your PSC1502 amp and your 4 Ohm component speakers kick ass, man do they kick ass. The installation is easy, and the sound is incredibly clear and kick ass loud. I have already been spreading the word about your system to friends and relatives.
I am in Hawg-wired heaven.
Thanks,
Viktor
|
 |
 |
David in Northbridge, MA WOW!! I have an 2006 Streetglide... |
 |
CX504-70 CX Series 4 Ohm Component Speakers |
04/23/2007 |
WOW!! I have an 2006 Streetglide. I first installed the Harley top of the line speakers very little sound quailty change.Then I asked the dealer if it was possible to squeeze out more power out of the radio. Sorry That's it. Then started looking into car amps and speakers but did not like the thought of losing space in one of the saddlebags. One day thumbing through a copy of Thunder Press The HAWG WIRED ad caught my eye. Checked out the web site and found all postive reviews. I gave it a shot purchased a pair of CX504-70 speakers and a PSC1502 amp. What an awesome combo! The system kicks ass! Plenty of volume and the CX504 speakers pump out crystal clear music. Thank you for producing quality product that works AWESOME and was a breeze to install.
|
 |
 |
Steve in Westchester, CA I recently upgraded to these com... |
 |
CX504-70 CX Series 4 Ohm Component Speakers |
04/14/2007 |
I recently upgraded to these component speakers from a pair of the 4 ohm perfomance speakers model BT504-50. There was a noticeable improvement to overall midrange with tighter tremble and better separation . These comonent speakers are simply the best speaker for any bike. - Steve
|
 |
 |
Robert in St. Paul, MN I just have to say we have been ... |
 |
PSC1502 PSC Series 150W (2x75) Amplifier |
04/07/2007 |
I just have to say we have been ordereing a lot of your items for our customers. They are all very happy with Hawg Wired products, the shipping is very fast, excellent customer service. Tripple A 5 star rating. Thanks for keeping my customers happy.
Squiggy, Owner - dumbassbiker.com
|
 |
 |
Joseph in East Alton, IL Thanks guy's for the killer ste... |
 |
PSC1502 PSC Series 150W (2x75) Amplifier |
04/06/2007 |
Thanks guy's for the killer stereo. It was delivered on Wednesday last week and I installed it Saturday night. Just as you said, pretty much straight forward. Have done a few car stereos when I was a kid and no stranger to turning wrenches but at 53 I end up making a lot of really stupid mistakes. None so far that I have noticed with the stereo upgrade as yet. Everything fit just as instructed and tied everything up inside the fairing so as not to have any rattles. Works great. An enormous amount of quality volume increase. I say quality increase because it is crystal clear and distortion free volume if I need it. I like to hear the bike when I am out running pretty hard so cruising around town or a leisurely country ride is the only time I use the stereo. A quarter volume is plenty even with the shortened windshield.
Thanks again for all your help. Sorry for being so cautious before I purchased from you. Just wanted to make sure I bought the right package first. Seems like I did just that. I am very happy with it and sure like the new quality to my old tunes!
Thanks again,
Joe
|
 |
 |
Paul in Livermore, CA I have recently installed the PS... |
 |
PSC1502 PSC Series 150W (2x75) Amplifier |
03/15/2007 |
I have recently installed the PSC1502 amplifier system on my 2007 FLHX and I am very impressed with the system and the folks at Hawg Wired. I emailed Hawg Wired with a question and they responded quickly and efficiently. The attention to customer satisfaction is refreshing and appreciated. After a very informative conversation, my system is blasting away beyond my expectations. I would highly recommend Hawg Wired products to anyone.
|
 |
 |
Mikey in El Cajon, CA I'm a tech at a indie shop here... |
 |
PSC1502 PSC Series 150W (2x75) Amplifier |
03/08/2007 |
I'm a tech at a indie shop here in San Diego, Performance Choppers, and have done several system installs and upgrades on client bikes. In the past, I've relied on the limited products available from other manufacturers, and what I could come up with on my own to install high-end systems in bikes, never really being satisfied with either the fit or final performance. In fact, I had gotten away from doing this type of work, because I felt the compromises outweighed the cost factor for my clients to justify. Then I found these guys, and I must say, even with the limited products I have used from them so far, they are superior to anything else on the market. Their cradle and faceplate are the solution I have been looking for to install aftermarket decks, and the fit and finish is second to none. The job looks better than factory. So much so that I once again have started to hype stereo installs and upgrades again to my clients. On top of that, their customer support is absolutely outstanding! I can't say enough good about my experiences with this company and look forward to continued business with them for all my bike stereo needs.
Sincerely,
Mikey "DynoMike"
Performance Choppers
|
 |
 |
Ron in Baytown, TX I am amazed.... the difference i... |
 |
PSC1502 PSC Series 150W (2x75) Amplifier |
02/24/2007 |
I am amazed.... the difference is night and day... the stock system does not compare to the Hawg Wired component speakers coupled with my PSC1502 amp. I have a Street Glide and at highway speeds I often would have the stock system turned all the way up. I am headed to Daytona in a few days and wanted to get the system and have it installed asap. I got lucky and caught Paul working on a Sat and he hooked me up right over the phone - the goods were shipped on Monday and showed up on the doorstep yesterday (Friday). After reading the directions and looking at what was in the package I decided to do it myself. The directions that come with the product cannot possibly be any more clear.... too easy... It was simple plug and play (to my stock HD radio) these guys pay close attention to detail when getting the kits together. I got it installed in about an hour and was jammin right away.
Here are a few photos to drive the fact that there is NO COMPARISON to stock. The complete build - PSC1502 amp coupled with CX504-70 component speakers and cross-overs...
Edit Note: Ron, your pictures are in our gallery - Thanks!
Mike
|
 |
 |
Fuzz in Sacramento, CA Hey guys, Danny at Arlen Ness se... |
 |
PSC1502 PSC Series 150W (2x75) Amplifier |
02/19/2007 |
Hey guys, Danny at Arlen Ness set me up with your 2 channel system for my 07 FLH classic the other day, and I want to say that it's the system that I always wanted new I could put on a bike without cutting into my saddle bags and/or changing my fairing around to add more speakers. This system ROCKS ! Even at 100mph I heard it clear and so did my passenger. It was easy to install (a couple of hours), and I also got to fix all of Harleys wire routing issues. Just an all around nice bolt on system that gave me all the performance I've always looked for.
Thank you again. Fuzz
|
 |